Dreame FP10 Air Purifier

*World's First: *World’s First: At the time of the Dreame FP10’s launch in December 2025, it was the world’s first air purifier with an active roller self-cleaning system. Report No.: FS-2025-MPC-409408.
*99.5%: Based on Dreame laboratory testing conducted in a 30 m² test chamber with two cats. The unit operated in Pet Mode for seven days. The cat hair collected in the hair collection bin weighed 2.582 g, while 0.014 g remained inside the unit, resulting in a 99.5% hair collection rate. Report No.: TL251105-001.
*99.99%, 99.98% (Hair Collection Bin): Based on third-party laboratory testing. Using glass as a carrier, microbial samples were placed in a sealed container for 2 hours. Results showed a 99.99% reduction of Staphylococcus albus, >99.98% removal of H1N2 virus, and >99.98% removal of Enterovirus 71. Report Nos.: 2021FM00811R01, 2021FM00811R04, 2021FM00811R02, 2020FM15831R03.
*19%: Based on Dreame laboratory testing. FP10’s original airflow intake was 377 m³/h. After upgrading with the LoopBoost™ airflow design, airflow increased to 450 m³/h, resulting in a 19.3% improvement in air purification efficiency. Report Nos.: TL250922-001, TL251024-001.
*Pet Weighing Tray: This optional accessory is designed for pet owners and is available for separate purchase. Please search “Pet Weighing Tray” in our store.
*Top-Tier: Featuring Dreame’s world-first active roller self-cleaning technology, FP10 is Dreame’s flagship air purifier, designed especially for pet households.
*0 Consumables: The primary filter does not need to be washed or replaced regularly after self-cleaning, without increasing the cost of consumables.
*5.8 m³/min: 350 m³/h (PCADR) / 60 min ≈ 5.8 m³ of air purified per minute.
*2.5×: Based on internal Dreame laboratory testing, FP10 contains 2.5× more porous activated carbon than Dreame’s previous flagship model, PM20.
*Pet Odors, Irritating Odors: The device was tested in a 1 m³ test chamber at a temperature of (23 ± 2) °C and relative humidity of (50 ± 5)% RH. Removal rates were calculated by comparing the initial concentrations of gaseous pollutants with concentrations measured after 1 hour of operation. Report No.: WTS2025-28662.
*99.97% Filtration Efficiency: Laboratory testing shows that the HEPA filter achieves a 99.97% filtration efficiency. Report No.: 2511B1176SHA-001.
*Pathogens, Bacteria, Cat Dander, Dog Dander: Tested in a 30 m³ chamber at a temperature of (20–25) °C and relative humidity of (50–70) % RH. Removal rates were calculated by comparing the initial concentrations of various bacteria/pathogens and dander with concentrations measured after 1 hour of operation. Report No.: WTS2025-28663.
*Particulate Matter (>0.3 μm): Laboratory testing shows that the HEPA filter achieves a 99.97% filtration efficiency. Report No.: 2511B1176SHA-001.
*Filter Life Cycle Reminder: Refers to the air purifier’s HEPA filter.
*32dB(A): Based on laboratory testing under normal operation: noise level is 60.8 dB(A) in Pet Mode and 32 dB(A) in Sleep Mode. Report No.: WTS2025-28657.
*Stress prevention: When Pet Mode is enabled, if a pet steps onto the weighing tray, airflow is gradually reduced to help prevent stress. *Unless otherwise specified, all comparative content (including images and text) is based on theoretical comparisons. Actual performance may vary depending on usage conditions and environment.
*2 Years:Based on calculations performed in accordance with GB 18801-2022, a CCM value of 40,000 mg corresponds to an estimated HEPA filter service life of up to 751 days under the specified test conditions. Actual filter life may vary depending on usage and environmental conditions.